Rinowash Ego - Portable micronized nasal shower for aerosol therapy with universal bell

Rinowash Ego
The device is a portable micronized nasal shower for aerosol therapy.

The device consists of a basic unit containing a pneumatic micro compressor and a rechargeable battery. On the upper part there is the medicine tray with the relative nebulization bell.

Operation occurs via a rechargeable battery and the charging status is indicated by 3 bright LEDs. The drive allows the liquid contained in the tray to be nebulized via an atomizer into the nasal cavities.

The excess liquid and nasal secretions are collected in a cavity between the two bells. The device is a micronized nasal shower for aerosol therapy which allows the treatment of upper respiratory tract diseases and physiological washing (with physiological, hypertonic solution or thermal water) and/or therapeutic (with drugs) of the nasal cavities. The device produces a jet of micronized solution which, directed into the nasal cavities, promotes hydration, fluidization and the removal of mucus and phlegm.

How to use:
Warning: the penetration of liquids inside the handpiece causes damage to the electrical components and dangers for the safety of the user. Before proceeding with the operations indicated below, remove the accessories from the handpiece. To carry out these operations, make sure that the power cable is not connected to the USB socket of the device.
Basic unit:
-Cleaning: Cannot be cleaned under water. Use a soft damp cloth; you can use a neutral non-abrasive detergent.
-Disinfection: Use a sponge or soft cloth moistened with a cold disinfectant solution (such as a solution with a sodium hypochlorite concentration of no more than 2%), following the instructions indicated by its manufacturer. Check that the solution is compatible with the material the base unit is made of.
-Sterilization: there is no sterilization cycle.
Upper part components:
-Cleaning: they can be washed with hot water (approx. 40°C) using detergent (dosed according to the detergent manufacturer's instructions) and rinsed under running water. When all parts have been cleaned they can be dried with a soft cloth and put away.
-Disinfection: after being washed they can be immersed in a cold disinfectant solution (such as a solution with a concentration of sodium hypochlorite not exceeding 2%), following the instructions indicated by the manufacturer. It is possible to disinfect the accessories by boiling them in water for a maximum of 10 minutes: the components must not be in direct contact with the bottom of the pan.
-Sterilization: they are compatible with the autoclave sterilization cycle at 121°C for at least 15 minutes. (max 30 min.) for a maximum of 20 cycles.

Storage:
-Temperature: -20°C-+60°C.
-Relative humidity: -Atmospheric pressure: 700-1,060 hPa.

-Power supply: internal lithium polymer battery 3.7 V 1,650 mAh
-Power supply: input 100-240 V, 50/60 Hz, 0.5 A; output 5V DC 2A
-Minimum filling volume: 3 ml
-Maximum filling volume: 15 ml
-Max compressor pressure: 1 bar
-Max flow to the compressor: 5 lpm
-Weight: 260g
-Dimensions: 210x60x100 mm
-Noise level: 58 dbA
-MMAD: 49 microns
-Useful life of the appliance: 400 hours.